Installation of supporting fan:
. Use a national standard cable of several meters to connect to the fan, and connect the other end to the air switch and an electric shock protector. .Before use, check whether the power supply voltage matches the nameplate and whether the rotation direction is correct. 3. The casing should be connected to a reliable ground wire, checked regularly, and the air inlet of the fan should be covered with a protective net to avoid accidents.
Equipment cleaning and collection:
Cut off the power, open the fan interface and exhaust port, the exhaust time is generally - minutes, and the remaining air must be squeezed. If water enters the equipment due to rain, be sure to drain the water and let it dry. For cleaning, you can use washing powder to wipe away the stains and oil stains, then scrub it clean with clean water and dry it in the sun. 3. Fold the device, cover the front with the bottom, and cover it with a tarpaulin. .If it will not be used for a long time, fold, bundle and package the clean equipment. The storage temperature is generally -~ degrees Celsius
.
The fan should be protected against moisture and corrosion. Inflatable molding equipment should be protected from rodent and insect bites.
Maintenance methods:
In order to ensure that your device reaches the normal service life, you cannot participate in too many children's games when it is turned on. Generally, a child can be accommodated on an inflatable model of 3 square meters. .The small shapes on the facilities are for decoration, and children should not be allowed to pull or tear them hard to avoid damage. 3. When children are playing, do not allow them to use hard objects to scribble on the device to avoid damage. .If the equipment is damaged, you can apply special glue on the damaged area and spare materials. After the glue is no longer sticky to your hands after a few minutes, glue it together, squeeze it appropriately, and it can be used in a few minutes. .The air pressure on the equipment is too soft. Check whether there is excessive air leakage or tearing holes. If the air pressure is too hard during a power outage, cover the air inlet of the fan a little. .If a large area is damaged due to abnormal use, the factory can provide professional repair services or send it directly back to the factory
Large inflatable castle, King Kong chariot, dual-purpose swing fish, cartoon animal car